PIC24FJ128GC010 Datasheet, PDF (437/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
37.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ128GC010 family AC characteristics and timing parameters.
TABLE 37-20: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Operating voltage VDD range as described in Section 37.1 “DC Characteristics”.
FIGURE 37-2:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
TABLE 37-21: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
Param
No.
Symbol
Characteristic
Min Typ⁽¹⁾ Max Units
Conditions
DO50 COSCO OSCO/CLKO Pin
—
— 15 pF
DO56 CIO
All I/O Pins and OSCO
—
— 50 pF
DO58 CB
SCLx, SDAx
—
— 400 pF
Note 1: Data in the “Typ” column is at 3.3V, +25°C unless otherwise stated.
In XT and HS modes when
external clock is used to drive
OSCI
EC mode
In I²C™ mode
 2012-2013 Microchip Technology Inc.
DS30009312B-page 437