PIC24FJ128GC010 Datasheet, PDF (425/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
37.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of the PIC24FJ128GC010 family electrical characteristics. Additional information will
be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the PIC24FJ128GC010 family are listed below. Exposure to these maximum rating
conditions for extended periods may affect device reliability. Functional operation of the device at these, or any other
conditions above the parameters indicated in the operation listings of this specification, is not implied.
Absolute Maximum Ratings^(†)
Ambient temperature under bias.............................................................................................................-40°C to +100°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any general purpose digital or analog pin (not 5.5V tolerant) with respect to VSS ....... -0.3V to (VDD + 0.3V)
Voltage on any general purpose digital or analog pin (5.5V tolerant, including MCLR) with respect to VSS:
When VDD = 0V: ......................................................................................................................... -0.3V to + 4.0V
When VDD  2.0V: ....................................................................................................................... -0.3V to +6.0V
Voltage on AVDD and SVDD with respect to VSS ..................................(VDD – 0.3V) to (lesser of: 4.0V or (VDD + 0.3V))
Voltage on AVSS and SVSS with respect to VSS ........................................................................................ -0.3V to +0.3V
Voltage on CH0+, CH0-, CH1+ and CH1- with respect to SVSS ................................................. -0.3V to (SVDD + 0.3V)
Voltage on VBAT with respect to VSS........................................................................................................ . -0.3V to +4.0V
Voltage on VUSB3V3 with respect to VSS ..................................................................................... (VCAP – 0.3V) to +4.0V
Voltage on VBUS with respect to VSS ....................................................................................................... -0.3V to +6.0V
Voltage on D+ or D- with respect to VSS:
(0 source impedance) (Note 1) ..............................................................................-0.5V to (VUSB3V3 + 0.5V)
(source impedance  28, VUSB3V3 3.0V) ............................................................................... -1.0V to +4.6V
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin (Note 2)................................................................................................................250 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin ....................................................................................................25 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports (Note 2)....................................................................................................200 mA
Note 1:
2:
The original “USB 2.0 Specification” indicated that USB devices should withstand 24-hour short circuits of
D+ or D- to VBUS voltages. This requirement was later removed in an Engineering Change Notice (ECN)
supplement to the USB specifications, which supersedes the original specifications. PIC24FJ128GC010
family devices will typically be able to survive this short-circuit test, but it is recommended to adhere to the
absolute maximum specified here to avoid damaging the device.
Maximum allowable current is a function of device maximum power dissipation (see Table 37-1).
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above
those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions
for extended periods may affect device reliability.
 2012-2013 Microchip Technology Inc.
DS30009312B-page 425