PIC24FJ128GC010 Datasheet, PDF (427/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
TABLE 37-3: DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Param
No.
Symbol
Characteristic
Min
Typ
Max Units
Conditions
Operating Voltage
DC10 VDD
Supply Voltage
2.0
—
3.6
V BOR disabled
VBOR
—
3.6
BOR enabled
DC12 VDR
RAM Data Retention
Greater of:
—
Voltage⁽¹⁾
VPORREL or
VBOR
—
V VBOR used only if BOR is
enabled (BOREN = 1)
DC16 VPOR VDD Start Voltage
VSS
to Ensure Internal
Power-on Reset Signal
—
—
V (Note 2)
DC16A VPORREL VDD Power-on Reset
Release Voltage
1.80
1.88
1.95
V (Note 3)
DC17A SRVDD Recommended
0.05
VDD Rise Skew Rate
to Ensure Internal
Power-on Reset Signal
—
— V/ms 0-3.3V in 66 ms
0-2.5V in 50 ms
(Note 2)
DC17B VBOR Brown-out Reset
2.0
Voltage on VDD Transition,
High-to-Low
2.1
2.2
V (Note 3)
DC17C VBATBOR VBAT BOR Threshold on
—
VBAT High-to-Low
1.68
—
V Applies when
VBTBOR = 1
Note 1: This is the limit to which VDD may be lowered and the RAM contents will always be retained.
2: If the VPOR or SRVDD parameters are not met, or the application experiences slow power-down VDD ramp
rates, it is recommended to enable and use the BOR.
3: On a rising VDD power-up sequence, application firmware execution begins at the higher of the VPORREL or
VBOR level (when BOREN = 1).
 2012-2013 Microchip Technology Inc.
DS30009312B-page 427