PIC24FJ128GC010 Datasheet, PDF (397/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
33.0 HIGH/LOW-VOLTAGE DETECT
(HLVD)
Note:
This data sheet summarizes the features of
this group of PIC24F devices. It is not
intended to be a comprehensive reference
source. For more information on the
High/Low-Voltage Detect, refer to the
“PIC24F Family Reference Manual”,
“High-Level
Integration
with
Programmable High/Low-Voltage Detect
(HLVD)” (DS39725).
The High/Low-Voltage Detect (HLVD) module is a
programmable circuit that allows the user to specify
both the device voltage trip point and the direction of
change.
An interrupt flag is set if the device experiences an
excursion past the trip point in the direction of change.
If the interrupt is enabled, the program execution will
branch to the interrupt vector address and the software
can then respond to the interrupt.
The HLVD Control register (see Register 33-1)
completely controls the operation of the HLVD module.
This allows the circuitry to be “turned off” by the user
under software control, which minimizes the current
consumption for the device.
FIGURE 33-1:
HIGH/LOW-VOLTAGE DETECT (HLVD) MODULE BLOCK DIAGRAM
Externally Generated
Trip Point
VDD
HLVDIN
VDD
HLVDL<3:0>
HLVDEN VDIR
Set
HLVDIF
HLVDEN
Internal Voltage
Reference
1.20V Typical
 2012-2013 Microchip Technology Inc.
DS30009312B-page 397