PIC24FJ128GC010 Datasheet, PDF (431/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
TABLE 37-8: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for Industrial
Param
No.
Sym
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
VIL
DI10
DI11
Input Low Voltage⁽³⁾
I/O Pins with ST Buffer
I/O Pins with TTL Buffer
VSS
—
0.2 VDD
V
VSS
— 0.15 VDD V
DI15
MCLR
VSS
—
0.2 VDD
V
DI16
OSCI (XT mode)
VSS
—
0.2 VDD
V
DI17
DI18
OSCI (HS mode)
VSS
I/O Pins with I²C™ Buffer
VSS
—
0.2 VDD
V
—
0.3 VDD
V
DI19
I/O Pins with SMBus Buffer
VSS
—
0.8
V SMBus enabled
VIH Input High Voltage⁽³⁾
DI20
I/O Pins with ST Buffer:
without 5V Tolerance
with 5V Tolerance
0.65 VDD
—
VDD
V
0.65 VDD
—
5.5
V
DI21
I/O Pins with TTL Buffer:
without 5V Tolerance
0.25 VDD + 0.8 —
VDD
V
with 5V Tolerance
0.25 VDD + 0.8 —
5.5
V
DI25
DI26
DI27
DI28
DI29
DI30 ICNPU
DI30A ICNPD
IIL
DI50
MCLR
OSCI (XT mode)
OSCI (HS mode)
I/O Pins with I²C™ Buffer
I/O Pins with SMBus Buffer
CNxx Pull-up Current
CNxx Pull-Down Current
Input Leakage Current⁽²⁾
I/O Ports
DI51
Analog Input Pins
0.8 VDD
0.7 VDD
0.7 VDD
0.7 VDD
2.1
150
15
—
—
—
VDD
V
—
VDD
V
—
VDD
V
—
5.5
V
—
5.5
V SMBus enabled
350
550
A VDD = 3.3V, VPIN = VSS
70
150
A VDD = 3.3V, VPIN = VDD
—
±1
A VSS  VPIN  VDD,
pin at high-impedance
—
±1
A VSS  VPIN  VDD,
pin at high-impedance
DI55
DI56
Note 1:
2:
3:
MCLR
—
—
±1
A VSS VPIN VDD
OSCI/CLKI
—
—
±1
A VSS VPIN VDD,
EC, XT and HS modes
Data in the “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
Negative current is defined as current sourced by the pin.
Refer to Table 1-3 for I/O pin buffer types.
 2012-2013 Microchip Technology Inc.
DS30009312B-page 431