PIC24FJ128GC010 Datasheet, PDF (290/472 Pages) Microchip Technology – 16-Bit Flash Microcontrollers with 12-Bit Pipeline A/D, Sigma-Delta A/D, USB On-The-Go and XLP Technology

PIC24FJ128GC010 FAMILY
REGISTER 19-13: U1CNFG2: USB CONFIGURATION REGISTER 2
U-0
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
—
bit 15
bit 8
U-0
—
bit 7
U-0
R/W-0
R/W-0
R/W-0
—
UVCMPSEL PUVBUS EXTI2CEN
U-0
R/W-0
R/W-0
—
UVCMPDIS⁽¹⁾ UTRDIS⁽¹⁾
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
UVCMPSEL: VBUS Comparator External Interface Selection bit
1 = Uses VBUSVLD, SESSVLD and SESSEND as comparator interface pins
0 = Uses VCMPST1 and VCMPST2 as comparator interface pins
PUVBUS: VBUS Pull-Up Enable bit
1 = Pull-up on VBUS pin is enabled
0 = Pull-up on VBUS pin is disabled
EXTI2CEN: I²C™ Interface for External Module Control Enable bit
1 = External module(s) is controlled via the I²C™ interface
0 = External module(s) is controlled via the dedicated pins
Unimplemented: Read as ‘0’
UVCMPDIS: USB On-Chip VBUS Comparator Disable bit⁽¹⁾
1 = On-chip charge VBUS comparator is disabled; digital input status interface is enabled
0 = On-chip charge VBUS comparator is active
UTRDIS: USB On-Chip Transceiver Disable bit⁽¹⁾
1 = On-chip transceiver is disabled; digital transceiver interface is enabled
0 = On-chip transceiver is active
Note 1: Never change these bits while the USBPWR bit is set (U1PWRC<0> = 1).
DS30009312B-page 290
 2012-2013 Microchip Technology Inc.