MC68HC908GP20 Datasheet, PDF (38/406 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

Use a high-frequency-response ceramic capacitor for C1. C2 is an
optional bulk current bypass capacitor for use in applications that require
the port pins to source high current levels.
MCU
V_DD
V_SS
C1
0.1 µF
+
C2
V_DD
NOTE: Component values shown
represent typical applications.
Figure 1-4. Power Supply Bypassing
1.6.2 Oscillator Pins (OSC1 and OSC2)
The OSC1 and OSC2 pins are the connections for the on-chip oscillator
circuit. See Section 7. Clock Generator Module (CGMC).
1.6.3 External Reset Pin (RST)
A logic 0 on the RST pin forces the MCU to a known startup state. RST
is bidirectional, allowing a reset of the entire system. It is driven low when
any internal reset source is asserted. This pin contains an internal pullup
resistor. See Section 19. System Integration Module (SIM).
Advance Information
38
MC68HC908GP20 — Rev 2.1
Freescale Semiconductor