MC68HC908GP20 Datasheet, PDF (228/406 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

16.3.3 Port A Input Pullup Enable Register
The port A input pullup enable register (PTAPUE) contains a software
configurable pullup device for each of the eight port A pins. Each bit is
individually configurable and requires that the data direction register,
DDRA, bit be configured as an input. Each pullup is automatically and
dynamically disabled when a port bit’s DDRA is configured for output
mode.
Address: $0004
Bit 7
6
5
4
3
2
1
Bit 0
Read:
PTAPUE7 PTAPUE6 PTAPUE5 PTAPUE4 PTAPUE3 PTAPUE2 PTAPUE1 PTAPUE0
Write:
Reset: 0
0
0
0
0
0
0
0
Figure 16-5. Port A Input Pullup Enable Register (PTAPUE)
PTAPUE7–PTAPUE0 — Port A Input Pullup Enable Bits
These writeable bits are software programmable to enable pullup
devices on an input port bit.
1 = Corresponding port A pin configured to have internal pullup
0 = Corresponding port A pin has internal pullup disconnected
Advance Information
228
MC68HC908GP20 — Rev 2.1
Freescale Semiconductor