HD64F3670 Datasheet, PDF (49/323 Pages) Renesas Technology Corp – Hitachi Single-Chip Microcomputer

Table 2.9 Block Data Transfer Instructions
Instruction
EEPMOV.B
Size
—
EEPMOV.W —
Function
if R4L ≠ 0 then
Repeat @ER5+ → @ER6+,
R4L–1 → R4L
Until R4L = 0
else next;
if R4 ≠ 0 then
Repeat @ER5+ → @ER6+,
R4–1 → R4
Until R4 = 0
else next;
Transfers a data block. Starting from the address set in ER5, transfers
data for the number of bytes set in R4L or R4 to the address location set
in ER6.
Execution of the next instruction begins as soon as the transfer is
completed.
2.4.2 Basic Instruction Formats
H8/300H CPU instructions consist of 2-byte (1-word) units. An instruction consists of an
operation field (op field), a register field (r field), an effective address extension (EA field), and a
condition field (cc).
Figure 2.7 shows examples of instruction formats.
Rev. 2.0, 03/02, page 25 of 298