HD64F7047F50 Datasheet, PDF (150/766 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

7.5.6 Module Standby Mode Setting
The UBC can set the module disable/enable by using the module standby control register 2
(MSTCR2). By releasing the module standby mode, register access becomes to be enabled.
By setting the MSTP0 bit of MSTCR2 to 1, the UBC is in the module standby mode in which the
clock supply is halted. See section 24, Power-Down Modes, for further details.
Rev. 2.00, 09/04, page 108 of 720