English
Language : 

PIC18F26K80-I Datasheet, PDF (88/622 Pages) Microchip Technology – 28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN™ and nanoWatt XLP Technology
PIC18F66K80 FAMILY
TABLE 5-4: INITIALIZATION CONDITIONS FOR ALL REGISTERS
Register
Applicable Devices
Power-on
Reset,
Brown-out
Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets
Wake-up via
WDT
or Interrupt
TOSU
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 ---0 0000
---0 0000 ---0 uuuu(3)
TOSH
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000 uuuu uuuu(3)
TOSL
STKPTR
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
0000 0000
00-0 0000
0000 0000
uu-0 0000
uuuu uuuu(3)
uu-u uuuu(3)
PCLATU
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 ---0 0000
---0 0000 ---u uuuu
PCLATH
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000 uuuu uuuu
PCL
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000
PC + 2(2)
TBLPTRU
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 --00 0000
--00 0000 --uu uuuu
TBLPTRH
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000 uuuu uuuu
TBLPTRL
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000 uuuu uuuu
TABLAT
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 0000
0000 0000 uuuu uuuu
PRODH
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 xxxx xxxx
uuuu uuuu uuuu uuuu
PRODL
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 xxxx xxxx
uuuu uuuu uuuu uuuu
INTCON
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 0000 000x
0000 000u uuuu uuuu(1)
INTCON2
INTCON3
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
1111 1111
1100 0000
1111 -1-1
11x0 0x00
uuuu -u-u(1)
uuuu uuuu(1)
INDF0
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
POSTINC0
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
POSTDEC0
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
PREINC0
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
PLUSW0
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
FSR0H
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 ---- xxxx
---- uuuu ---- uuuu
FSR0L
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 xxxx xxxx
uuuu uuuu uuuu uuuu
WREG
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 xxxx xxxx
uuuu uuuu uuuu uuuu
INDF1
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
POSTINC1
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
POSTDEC1
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
PREINC1
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
PLUSW1
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
FSR1H
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 ---- xxxx
---- uuuu ---- uuuu
FSR1L
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 xxxx xxxx
uuuu uuuu uuuu uuuu
BSR
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80 ---- 0000
---- 0000 ---- uuuu
INDF2
PIC18F2XK80 PIC18F4XK80 PIC18F6XK80
N/A
N/A
N/A
Legend:
Note 1:
2:
3:
4:
5:
u = unchanged; x = unknown; - = unimplemented bit, read as ‘0’; q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the hardware
stack.
See Table 5-3 for Reset value for specific conditions.
Bits 6 and 7 of PORTA, LATA and TRISA are enabled, depending on the oscillator mode selected. When not
enabled as PORTA pins, they are disabled and read as ‘0’.
DS39977F-page 88
 2010-2012 Microchip Technology Inc.