PIC18F26K80-I Datasheet, PDF (202/622 Pages) Microchip Technology – 28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN™ and nanoWatt XLP Technology

PIC18F66K80 FAMILY
REGISTER 12-2: MDSRC: MODULATION SOURCE CONTROL REGISTER
R/W-0
U-0
U-0
U-0
R/W-x
R/W-x
R/W-x
MDSODIS
—
—
—
MDSRC3
MDSRC2
MDSRC1
bit 7
R/W-x
MDSRC0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 7
bit 6-4
bit 3-0
MDSODIS: Modulation Source Output Disable bit
1 = Output signal driving the peripheral output pin (selected by MDMS<3:0>) is disabled
0 = Output signal driving the peripheral output pin (selected by MDMS<3:0>) is enabled
Unimplemented: Read as ‘0’
MDSRC<3:0> Modulation Source Selection bits
1111-1010 = Reserved; no channel connected
1001 = CCP5 output (PWM Output mode only)
1000 = CCP4 output (PWM Output mode only)
0111 = CCP3 output (PWM Output mode only)
0110 = CCP2 output (PWM Output mode only)
0101 = ECCP1 output (PWM Output mode only)
0100 = EUSART2 TX output
0011 = EUSART1 TX output
0010 = MSSP SDO output
0001 = MDMIN port pin
0000 = MDBIT bit of the MDCON register is the modulation source
DS39977F-page 202
 2010-2012 Microchip Technology Inc.