PIC18F26K80-I Datasheet, PDF (539/622 Pages) Microchip Technology – 28/40/44/64-Pin, Enhanced Flash Microcontrollers with ECAN™ and nanoWatt XLP Technology

PIC18F66K80 FAMILY
31.1 DC Characteristics: Supply Voltage
PIC18F66K80 Family (Industrial/Extended)
PIC18F66K80 Family
(Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for industrial
-40°C  TA  +125°C for extended
Param
No.
Symbol
Characteristic
Min
Typ
Max Units
Conditions
D001 VDD
Supply Voltage
1.8
—
3.6
V For LF devices
1.8
—
5.5
V For F devices
D001C AVDD Analog Supply Voltage VDD – 0.3 — VDD + 0.3 V
D001D AVSS Analog Ground Potential VSS – 0.3 — VSS + 0.3 V
D002 VDR
RAM Data Retention
Voltage⁽¹⁾
1.5
—
—
V
D003 VPOR
VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
—
—
0.7
V See Section 5.3 “Power-on
Reset (POR)” for details
D004 SVDD
VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05
—
— V/ms See Section 5.3 “Power-on
Reset (POR)” for details
D005 BVDD Brown-out Reset Voltage
(High, Medium and
Low-Power mode
BORV<1:0> = 11⁽²⁾
BORV<1:0> = 10
BORV<1:0> = 01
BORV<1:0> = 00
1.69
1.8
1.91
V
1.88
2.0
2.12
V
2.53
2.7
2.86
V
2.82
3.0
3.18
V
Note 1: This is the limit to which VDD can be lowered in Sleep mode, or during a device Reset, without losing RAM data.
2: Device will operate normally until Brown-out Reset occurs, even though VDD may be below VDDMIN.
 2010-2012 Microchip Technology Inc.
DS39977F-page 539