MC68HC11P2 Datasheet, PDF (96/268 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
Serial Communications Interface (SCI)
M — Mode (select character format)
1 = Start bit, 9 data bits, 1 stop bit.
0 = Start bit, 8 data bits, 1 stop bit.
WAKE — Wakeup by address mark/idle
1 = Wakeup by address mark (most significant data bit set).
0 = Wakeup by IDLE line recognition.
ILT — Idle line type
1 = Long (SCI counts ones only after stop bit).
0 = Short (SCI counts consecutive ones after start bit).
This bit determines which of two types of idle line detection method is
used by the SCI receiver. In short mode the stop bit and any bits that
were ones before the stop bit will be considered as part of that string
of ones, possibly resulting in erroneous or premature detection of an
idle line condition. In long mode the SCI system does not begin
counting ones until a stop bit is received.
PE — Parity enable
1 = Parity enabled.
0 = Parity disabled.
PT — Parity type
1 = Parity odd (an odd number of ones causes parity bit to be zero,
an even number of ones causes parity bit to be one).
0 = Parity even (an even number of ones causes parity bit to be
zero, an odd number of ones causes parity bit to be one).
Technical Data
Serial Communications Interface (SCI)
For More Information On This Product,
Go to: www.freescale.com
MC68HC11P2 — Rev 1.0