|
MC9S12Q128_10 Datasheet, PDF (223/644 Pages) Freescale Semiconductor, Inc – HCS12 Microcontrollers | |||
|
◁ |
Chapter 8
Analog-to-Digital Converter (ATD10B8C)
Block Description
8.1 Introduction
The ATD10B8C is an 8-channel, 10-bit, multiplexed input successive approximation analog-to-digital
converter. Refer to device electrical speciï¬cations for ATD accuracy.
The block is designed to be upwards compatible with the 68HC11 standard 8-bit A/D converter. In
addition, there are new operating modes that are unique to the HC12 design.
8.1.1 Features
⢠8/10-bit resolution.
⢠7 µsec, 10-bit single conversion time.
⢠Sample buffer ampliï¬er.
⢠Programmable sample time.
⢠Left/right justiï¬ed, signed/unsigned result data.
⢠External trigger control.
⢠Conversion completion interrupt generation.
⢠Analog input multiplexer for eight analog input channels.
⢠Analog/digital input pin multiplexing.
⢠1-to-8 conversion sequence lengths.
⢠Continuous conversion mode.
⢠Multiple channel scans.
8.1.2 Modes of Operation
8.1.2.1 Conversion Modes
There is software programmable selection between performing single or continuous conversion on a
single channel or multiple channels.
Freescale Semiconductor
MC9S12Q128
223
Rev 1.10
|
▷ |