XRT79L71 Datasheet, PDF (431/441 Pages) Exar Corporation – 1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC

áç
PRELIMINARY
1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
XRT79L71
REV. P1.0.3
TRANSMIT ATM CELL PROCESSOR BLOCK - TRANSMIT USER CELL FILTER # 3 - PATTERN
REGISTER - HEADER BYTE 4 (ADDRESS = 0X1F67)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Transmit User Cell Filter # 3 - Pattern Register - Byte 4 [7:0]
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
0
0
0
0
0
0
0
0
BIT NUMBER
NAME
7-0
Transmit User Cell
Filter # 3 - Pattern
Register - Header Byte 4
TYPE
R/W
DESCRIPTION
Transmit User Cell Filter # 3 - Pattern Register - Header Byte
4:
The User Cell filtering criteria (for Transmit User Cell Filter # 3) is
defined based upon the contents of 9 read/write registers.
These registers are the four "Transmit ATM Cell Processor Block
- Transmit User Cell Filter # 3 - Pattern Registers", the four
"Transmit ATM Cell Processor Block - Transmit User Cell Filter #
3 - Check Registers" and the "Transmit ATM Cell Processor
Block - Transmit User Cell Filter # 3 Control Register.
This READ/WRITE register, along with the "Transmit ATM Cell
Processor Block - Transmit User Cell Filter # 3 - Check Register -
Header Byte 4" permits the user to define the User Cell Filtering
criteria for "Octet # 4" of the incoming User Cell.
The user will write the header byte pattern (for Octet 4) that he/
she wishes to use as part of the "User Cell Filtering" criteria, into
this register.
The user will also write in a value into the "Transmit ATM Cell
Processor Block - Transmit User Cell Filter # 3 - Check Register -
Header Byte 4" that indicates which bits within the first octet of
the incoming cells are to be compared with the contents of this
register.
419