XRT79L71 Datasheet, PDF (412/441 Pages) Exar Corporation – 1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC

XRT79L71
REV. P1.0.3
PRELIMINARY
áç
1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
TRANSMIT ATM CELL PROCESSOR BLOCK - TRANSMIT USER CELL FILTER # 1 - FILTERED CELL
COUNT - BYTE 0 (ADDRESS = 0X1F5F)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Transmit User Cell Filter # 1 - Filtered Cell Count[7:0]
RUR
RUR
RUR
RUR
RUR
RUR
RUR
RUR
0
0
0
0
0
0
0
0
BIT NUMBER
NAME
7-0
Transmit User Cell Fil-
ter # 1 - Filtered Cell
Count[7:0]
TYPE
DESCRIPTION
RUR
Transmit User Cell Filter # 1 - Filtered Cell Count[7:0]:
These RESET-upon-READ bit-fields, along with that in the "Transmit
ATM Cell Processor Block - Transmit User Cell Filter # 1 - Filtered Cell
Count - Bytes 3" through "1" register contain a 32-bit expression for
the number of User Cells that have been filtered by Transmit User Cell
Filter # 1 since the last read of this register.
Depending upon the configuration settings within the "Transmit ATM
Cell Processor Block - Transmit User Cell Filter Control - Transmit
User Cell Filter # 1" Register (Address = 0x1F53), these register bits
will be incremented anytime Transmit User Cell Filter # 1 performs any
of the following functions.
• Discards an incoming "User Cell".
• Copies (or Replicates) an incoming "User Cell" and routes the
"copy" to the Transmit Cell Extraction Buffer.·
• both the above actions.
This particular register contains the LSB (Least Significant Byte) value
for this 32-bit expression.
NOTE: If the number of "filtered cells" reaches the value
"0xFFFFFFFF" then these registers will saturate to and
remain at this value (e.g., it will not overflow to "0x00000000").
400