XRT79L71 Datasheet, PDF (298/441 Pages) Exar Corporation – 1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC

XRT79L71
REV. P1.0.3
PRELIMINARY
áç
1 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
RECEIVE ATM CELL PROCESSOR BLOCK - RECEIVE USER CELL FILTER # 0 - PATTERN REGISTER -
HEADER BYTE 1 (ADDRESS = 0X1744)
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
Receive User Cell Filter # 0 - Pattern Register - Byte 1 [7:0]
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
0
0
0
0
0
0
0
0
BIT NUMBER
NAME
TYPE
DESCRIPTION
7-0
Receive User Cell Filter #
0 - Pattern Register -
Header Byte 1
R/W Receive User Cell Filter # 0 - Pattern Register - Header Byte 1:
The User Cell filtering criteria (for Receive User Cell Filter # 0) is
defined based upon the contents of 9 read/write registers. These
registers are the four "Receive ATM Cell Processor Block - Receive
User Cell Filter # 0 - Pattern Registers", the four "Receive ATM Cell
Processor Block - Receive User Cell Filter # 0 - Check Registers"
and the "Receive ATM Cell Processor Block - Receive User Cell Fil-
ter # 0 Control Register.
This READ/WRITE register, along with the "Receive ATM Cell Pro-
cessor Block - Receive User Cell Filter # 0 - Check Register -
Header Byte 1" permits the user to define the User Cell Filtering cri-
teria for "Octet # 1" of the incoming User Cell. The user will write the
header byte pattern (for Octet 1) that he/she wishes to use as part of
the "User Cell Filtering" criteria, into this register. The user will also
write in a value into the "Receive ATM Cell Processor Block -
Receive User Cell Filter # 0 - Check Register - Header Byte 1" that
indicates which bits within the first octet of the incoming cells are to
be compared with the contents of this register.
286