DS925 Datasheet, PDF (5/109 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Zynq UltraScale+ MPSoC Data Sheet: DC and AC Switching Characteristics
Table 2: Recommended Operating Conditions⁽¹⁾⁽²⁾ (Cont’d)
Symbol
Description
Min
Programmable Logic
PL internal supply voltage.
0.825
V_CCINT
For -1LI and -2LE (0.72V only) devices: PL internal
supply voltage.
0.698
For -3E devices: PL internal supply voltage.
0.873
PL internal supply voltage for the I/O banks.
0.825
V_{CCINT_IO(7)}
For -1LI and -2LE devices (0.85V only): PL internal
supply voltage for the I/O banks.
For -3E devices: PL internal supply voltage for the I/O
banks.
0.825
0.873
V_CCBRAM
Block RAM supply voltage.
For -3E devices: block RAM supply voltage.
0.825
0.873
V_CCAUX
V_CCO(8)
Auxiliary supply voltage.
Supply voltage for HD I/O banks.
Supply voltage for HP I/O banks.
1.746
1.140
0.950
V_{CCAUX_IO(9)}
V_IN(10)
I_IN(11)
Auxiliary I/O supply voltage.
I/O input voltage.
Maximum current through any pin in a powered or
unpowered bank when forward biasing the clamp
diode.
1.746
–0.200
–
GTH or GTY Transceiver
V_MGTAVCC(12)
V_MGTAVTT(12)
Analog supply voltage for the GTH or GTY transceiver.
Analog supply voltage for the GTH or GTY transmitter
and receiver termination circuits.
0.873
1.164
V_{MGTVCCAUX(12)}
Auxiliary analog QPLL voltage supply for the
transceivers.
1.746
V_{MGTAVTTRCAL(12)}
Analog supply voltage for the resistor calibration circuit
of the GTH or GTY transceiver column.
1.164
Typ
0.850
0.720
0.900
0.850
0.850
0.900
0.850
0.900
1.800
–
–
1.800
–
–
0.900
1.20
1.80
1.20
Max
Units
0.876
V
0.742
V
0.927
V
0.876
V
0.876
V
0.927
V
0.876
V
0.927
V
1.854
V
3.400
V
1.900
V
1.854
V
V_CCO + 0.200
V
mA
0.927
V
1.236
V
1.854
V
1.236
V
DS925 (v1.1) June 20, 2016
Advance Product Specification
www.xilinx.com
Send Feedback
5