DS925 Datasheet, PDF (1/109 Pages) Xilinx, Inc – DC and AC Switching Characteristics

Zynq UltraScale+ MPSoC Data Sheet:
DC and AC Switching Characteristics
DS925 (v1.1) June 20, 2016
Advance Product Specification
Summary
The Xilinx® Zynq® UltraScale+™ MPSoCs are available in -3, -2, -1 speed grades, with -3E devices having
the highest performance. The -2LE and -1LI devices can operate at a V_CCINT voltage at 0.85V or 0.72V and
are screened for lower maximum static power. When operated at V_CCINT = 0.85V, using -2LE and -1LI
devices, the speed specification for the L devices is the same as the -2I or -1I speed grades. When
operated at V_CCINT = 0.72V, the -2LE and -1LI performance and static and dynamic power is reduced.
DC and AC characteristics are specified in extended (E) and industrial (I) temperature ranges. Except the
operating temperature range or unless otherwise noted, all the DC and AC electrical parameters are the
same for a particular speed grade (that is, the timing characteristics of a -1 speed grade extended device
are the same as for a -1 speed grade industrial device). However, only selected speed grades and/or
devices are available in each temperature range.
All supply voltage and junction temperature specifications are representative of worst-case conditions.
The parameters included are common to popular designs and typical applications.
This data sheet, part of an overall set of documentation on the Zynq UltraScale+ MPSoCs, is available on
the Xilinx website at www.xilinx.com/documentation.
DC Characteristics
Table 1: Absolute Maximum Ratings⁽¹⁾
Symbol
Description
Processor System (PS)
V_{CC_PSINTFP}
V_{CC_PSINTLP}
V_{CC_PSAUX}
V_{CC_PSINTFP_DDR}
V_{CC_PSADC}
V_{CC_PSPLL}
V_{PS_MGTRAVCC}
V_{PS_MGTRAVTT}
V_{PS_MGTREFCLK}
V_{PS_MGTRIN}
V_{CCO_PSDDR}
V_{CC_PSDDR_PLL}
PS primary logic full-power domain supply voltage.
PS primary logic low-power domain supply voltage.
PS auxiliary supply voltage.
PS DDR controller and PHY supply voltage.
PS SYSMON ADC supply voltage relative to GND_PSADC.
PS PLL supply voltage.
PS-GTR supply voltage.
PS-GTR termination voltage.
PS-GTR reference clock input voltage.
PS-GTR receiver input voltage.
PS DDR I/O supply voltage.
PS DDR PLL supply voltage.
Min
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
–0.500
Max
1.000
1.000
1.980
1.000
1.980
1.320
1.000
1.980
1.100
1.650
1.980
Units
V
V
V
V
V
V
V
V
V
V
V
V
© Copyright 2015–2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included herein are trademarks of
Xilinx in the United States and other countries. AMBA, AMBA Designer, ARM, ARM1176JZ-S, CoreSight, Cortex, and PrimeCell are trademarks of ARM in the EU and other
countries. PCI, PCI Express, PCIe, and PCI-X are trademarks of PCI-SIG. All other trademarks are the property of their respective owners.
DS925 (v1.1) June 20, 2016
Advance Product Specification
www.xilinx.com
Send Feedback
1