|
HD6433832S Datasheet, PDF (319/560 Pages) Renesas Technology Corp – single-chip microcomputers | |||
|
◁ |
Bit 7âClock Select (CKS): Bit 7 sets the A/D conversion speed.
Conversion Time
Bit 7: CKS
Conversion Period
Ï = 2 MHz
Ï = 5 MHz
0
62/Ï (initial value)
31 µs
12.4 µs
1
31/Ï
15.5 µs
â*
Note: * Operation is not guaranteed if the conversion time is less than 12.4 µs. Set bit 7 for a value
of at least 12.4 µs.
Bit 6âExternal Trigger Select (TRGE): Bit 6 enables or disables the start of A/D conversion by
external trigger input.
Bit 6: TRGE
Description
0
Disables start of A/D conversion by external trigger
(initial value)
1
Enables start of A/D conversion by rising or falling edge of external trigger at
pin ADTRG*
Note: * The external trigger (ADTRG) edge is selected by bit INTEG4 of the IRQ edge select
register (IEGR). See 3.3.2, Interrupt Edge Select Register (IEGR), for details.
Bits 5 and 4âReserved Bits: Bits 5 and 4 are reserved; they are always read as 1, and cannot be
modified.
Bits 3 to 0âChannel Select (CH3 to CH0): Bits 3 to 0 select the analog input channel.
The channel selection should be made while bit ADSF is cleared to 0.
304
|
▷ |