|
HD6473837H Datasheet, PDF (20/562 Pages) Renesas Technology Corp – Hardware Manual | |||
|
◁ |
Table 1.1 Features (cont)
Item
Timers
Serial communication
interface
14-bit PWM
A/D converter
LCD controller/driver
Description
⢠Timer B: 8-bit timer
 Count-up timer with selection of seven internal clock signals or
event input from external pin
 Auto-reloading
⢠Timer C: 8-bit timer
 Count-up/count-down timer with selection of seven internal clock
signals or event input from external pin
 Auto-reloading
⢠Timer F: 16-bit timer
 Can be used as two independent 8-bit timers.
 Count-up timer with selection of four internal clock signals or
event input from external pin
 Compare-match function with toggle output
⢠Timer G: 8-bit timer
 Count-up timer with selection of four internal clock signals
 Input capture function with built-in noise canceller circuit
Three channels on chip
⢠SCI1: synchronous serial interface
Choice of 8-bit or 16-bit data transfer
⢠SCI2: 8-bit synchronous serial interface
Automatic transfer of 32-byte data segments
⢠SCI3: 8-bit synchronous or asynchronous serial interface
Built-in function for multiprocessor communication
Pulse-division PWM output for reduced ripple
⢠Can be used as a 14-bit D/A converter by connecting to an external
low-pass filter.
⢠Successive approximations using a resistance ladder resolution:
8 bits
⢠12-channel analog input port
⢠Conversion time: 31/Ï or 62/Ï per channel
Up to 40 segment pins and 4 common pins
⢠Choice of four duty cycles (static, 1/2, 1/3, 1/4)
⢠Segments can be expanded externally
⢠Segment pins can be switched to general-purpose ports in groups of
four
3
|
▷ |