HD6473837H Datasheet, PDF (135/562 Pages) Renesas Technology Corp – Hardware Manual

6.4 H8/3837 PROM Mode
6.4.1 Setting to PROM Mode
If the on-chip ROM is PROM, setting the chip to PROM mode stops operation as a
microcontroller and allows the PROM to be programmed in the same way as the standard
HN27C101 EPROM. However, page programming is not supported. Table 6.6 shows how to set
the chip to PROM mode.
Table 6.6 Setting to PROM Mode
Pin Name
TEST
PB₄/AN₄
PB₅/AN₅
PB₆/AN₆
Setting
High level
Low level
High level
6.4.2 Socket Adapter Pin Arrangement and Memory Map
A standard PROM programmer can be used to program the PROM. A socket adapter is required
for conversion to 32 pins, as listed in table 6.7.
Figure 6.6 shows the pin-to-pin wiring of the socket adapter. Figure 6.7 shows a memory map.
Table 6.7 Socket Adapter
Package
100-pin (FP-100B)
100-pin (FP-100A)
100-pin (TFP-100B)
Socket Adapter
HS3836ESH01H
HS3836ESF01H
HS3836ESN01H
118