PXB4340E Datasheet, PDF (110/185 Pages) Infineon Technologies AG – ICs for Communications

 'RZQVWUHDP ([WHUQDO 5$0 ) (QWU\ 'ZRUGV 
3;%  (
5HJLVWHU 'HVFULSWLRQ




3 31 30 29 28 CEDCID(6:0)
CSDCID(6:0)
CPMTID(6:0)
CPMOID(6:0)
2 31
CTSDCID(6:0) 19 18 17 16 15 14 13 12 11..7 6 5 4 3..0
1 31
30..15
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 31 30 29 28 27 26 25 24 23 22 20 19
LCI2(13:0)
PN(4:0)
 'RZQVWUHDP ) 2$0 (QWU\ 'ZRUG
Bit 31
Bit 30
Bit 29
Bit 28
Bit 27
Bit 26
Bit 25
PAR
Dword parity protection. In normal operation write to 0. Should always
read as 0.
CPMTEN
Enable a Terminating F5 Segment or End-to-End FM flow. Flow type
selected with PMFT in PM RAM entry. Related identifier CPMTID in
Dword3.
CPMOEN
Enable an Originating F5 Segment or End-to-End FM flow. Flow type
selected with PMFT in PM RAM entry. Related identifier CPMOID in
Dword3.
CLBS
F5 Loopback State according to I.610. Should be set before inserting a
LB cell, cleared after reception of the looped cell.
CSRCIDEN
Loopback of LB cells using LB source ID
1
Enabled. Normally this bit is =0 as the location ID is used
to detect intra-domain LB cells.
CLOCIDEN
Loopback of LB cells using LB location ID
1
Enabled. Normally this bit is =1 as according to the
standard the location ID is used to detect intra-domain LB
cells.
ACDEAC
Treatment of Activation/Deactivation cells at their destination points:
0
Discard (if Activation / Deactivation function is not used)
1
Extract to receive buffer (if Activation / Deactivation is
supported)
Data Sheet
3-110
04.2000