MC9S12NE64_06 Datasheet, PDF (103/554 Pages) Freescale Semiconductor, Inc – Microcontrollers

NOTE
Vector addresses and their relative interrupt priority are determined at the
MCU level.
Interrupts
2.8.1 Description of Flash Interrupt Operation
The logic used for generating interrupts is shown in Figure 2-28.
The Flash module uses the CBEIF and CCIF flags in combination with the CBIE and CCIE enable bits to
generate the Flash command interrupt request.
CBEIF
CBEIE
Flash Command Interrupt Request
CCIF
CCIE
Figure 2-28. Flash Interrupt Implementation
For a detailed description of the register bits, refer to Section 2.3.2.4, “Flash Configuration Register
(FCNFG)” and Section 2.3.2.7, “Flash Status Register (FSTAT)”.
MC9S12NE64 Data Sheet, Rev. 1.1
Freescale Semiconductor
103