Z80382 Datasheet, PDF (5/77 Pages) Zilog, Inc. – HIGH-PERFORMANCE DATA COMMUNICATIONS PROCESSORS

Zilog
ABSOLUTE MAXIMUM RATINGS
Symbol
V_DD
V_IN
T_OPR
T_STG
Description
Supply Voltage
Input Voltage
Operating Temp
Storage Temp
Value
Unit
-0.3 to +7.0
V
-0.3 to V_DD+0.3
V
0 to +70
°C
-55 to +150
°C
Z80382/Z8L382
High-Performance Data Communications Processors
Stresses greater than those listed under Absolute Maxi-
1 ^{mum Ratings may cause permanent damage to the de-}
vice. This is a stress rating only; operation of the device at
any condition above those indicated in the operational sec-
tions of these specifications is not implied. Exposure to ab-
solute maximum rating conditions for extended periods
may affect device reliability.
STANDARD TEST CONDITIONS
The DC Characteristics which follow apply for the following
standard test conditions, unless otherwise noted. All volt-
ages are referenced to GND (0V). Positive current flows
into the referenced pin (Figure 3, Test Load Diagram).
s Operating temperature range:
Ð Standard: 0°C to 70°C
s Voltage Supply Range:
Ð +4.5V £ V_DD £ +5.5V (Z80382 versions)
Ð +3.0V £ V_DD £ +3.6V (Z8L382 versions)
All AC parameters assume a load capacitance of 50 pF.
Add 10 ns delay for each 50 pF increase in load up to a
maximum of 150 pF for the data bus and 100 pF for ad-
dress and control lines. AC timing measurements are ref-
erenced to 1.5 volts (except for clock, which is referenced
to the 10% and 90% points). Maximum capacitive load for
PHI is 125 pF.
I_OL = 2 mA
100 pF
1.4V
I_OH = 250 mA
Figure 3. Test Load Diagram
DS97Z382000
PRELIMINARY
5