DS003-1 Datasheet, PDF (26/76 Pages) Xilinx, Inc – Fast, high-density Field-Programmable Gate Arrays

Virtex™ 2.5 V Field Programmable Gate Arrays
R
Virtex DC Characteristics
Absolute Maximum Ratings
Symbol
Description⁽¹⁾
Units
V_CCINT
V_CCO
V_REF
V_IN
Supply voltage relative to GND⁽²⁾
Supply voltage relative to GND⁽²⁾
Input Reference Voltage
Input voltage relative to GND⁽³⁾
Using V_REF
Internal threshold
–0.5 to 3.0
V
–0.5 to 4.0
V
–0.5 to 3.6
V
–0.5 to 3.6
V
–0.5 to 5.5
V
V_TS
Voltage applied to 3-state output
–0.5 to 5.5
V
V_CC
Longest Supply Voltage Rise Time from 1V-2.375V
50
ms
T_STG
T_J
Storage temperature (ambient)
Junction temperature⁽⁴⁾
Plastic Packages
–65 to +150
°C
+125
°C
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress
ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions
is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time can affect device reliability.
2. Power supplies can turn on in any order.
3. For protracted periods (e.g., longer than a day), V_IN should not exceed V_CCO by more than 3.6 V.
4. For soldering guidelines and thermal considerations, see the "Device Packaging" infomation on www.xilinx.com.
Recommended Operating Conditions
Symbol
Description
Min
Max Units
V_CCINT ⁽¹⁾
Input Supply voltage relative to GND, T_J = 0 °C to +85°C
Input Supply voltage relative to GND, T_J = –40°C to +100°C
Commercial
Industrial
V_CCO ⁽⁴⁾
Supply voltage relative to GND, T_J = 0 °C to +85°C
Supply voltage relative to GND, T_J = –40°C to +100°C
Commercial
Industrial
T_IN Input signal transition time
2.5 – 5% 2.5 + 5% V
2.5 – 5% 2.5 + 5% V
1.4
3.6
V
1.4
3.6
V
250
ns
Notes:
1. Correct operation is guaranteed with a minimum V_CCINT of 2.375 V (Nominal V_CCINT –5%). Below the minimum value, all delay
parameters increase by 3% for each 50-mV reduction in V_CCINT below the specified range.
2. At junction temperatures above those listed as Operating Conditions, delay parameters do increase. Please refer to the TRCE report.
3. Input and output measurement threshold is ~50% of V_CC.
4. Min and Max values for V_CCO are I/O Standard dependant.
Module 3 of 4
2
www.xilinx.com
1-800-255-7778
DS003-3 (v3.2) September 10, 2002
Production Product Specification