LM3S5D91 Datasheet, PDF (607/1340 Pages) Texas Instruments – Stellaris® LM3S5D91 Microcontroller

Stellaris^® LM3S5D91 Microcontroller
Table 12-1. ADC Signals (100LQFP) (continued)
Pin Name
Pin Number Pin Mux / Pin Pin Type Buffer Type^a Description
Assignment
AIN10
92
PB4
I
Analog Analog-to-digital converter input 10.
AIN11
91
PB5
I
Analog Analog-to-digital converter input 11.
AIN12
13
PD3
I
Analog Analog-to-digital converter input 12.
AIN13
12
PD2
I
Analog Analog-to-digital converter input 13.
AIN14
11
PD1
I
Analog Analog-to-digital converter input 14.
AIN15
10
PD0
I
Analog Analog-to-digital converter input 15.
VREFA
90
PB6
I
Analog This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
25-23 on page 1270 .
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
Table 12-2. ADC Signals (108BGA)
Pin Name
Pin Number Pin Mux / Pin Pin Type Buffer Type^a Description
Assignment
AIN0
B1
PE7
I
Analog Analog-to-digital converter input 0.
AIN1
A1
PE6
I
Analog Analog-to-digital converter input 1.
AIN2
B3
PE5
I
Analog Analog-to-digital converter input 2.
AIN3
B2
PE4
I
Analog Analog-to-digital converter input 3.
AIN4
A2
PD7
I
Analog Analog-to-digital converter input 4.
AIN5
A3
PD6
I
Analog Analog-to-digital converter input 5.
AIN6
C6
PD5
I
Analog Analog-to-digital converter input 6.
AIN7
B5
PD4
I
Analog Analog-to-digital converter input 7.
AIN8
B4
PE3
I
Analog Analog-to-digital converter input 8.
AIN9
A4
PE2
I
Analog Analog-to-digital converter input 9.
AIN10
A6
PB4
I
Analog Analog-to-digital converter input 10.
AIN11
B7
PB5
I
Analog Analog-to-digital converter input 11.
AIN12
H1
PD3
I
Analog Analog-to-digital converter input 12.
AIN13
H2
PD2
I
Analog Analog-to-digital converter input 13.
AIN14
G2
PD1
I
Analog Analog-to-digital converter input 14.
AIN15
G1
PD0
I
Analog Analog-to-digital converter input 15.
VREFA
A7
PB6
I
Analog This input provides a reference voltage used to
specify the input voltage at which the ADC converts
to a maximum value. In other words, the voltage
that is applied to VREFA is the voltage with which
an AINn signal is converted to 4095. The VREFA
input is limited to the range specified in Table
25-23 on page 1270 .
a. The TTL designation indicates the pin has TTL-compatible voltage levels.
January 22, 2012
607
Texas Instruments-Production Data