S71PL129JC0 Datasheet, PDF (62/149 Pages) SPANSION – Stacked Multi-Chip Product (MCP) Flash Memory

Advance Information
Absolute Maximum Ratings
Storage Temperature Plastic Packages . . . . . . . . . . . . . . . . –65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65°C to +125°C
Voltage with Respect to Ground
V_CC (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to +4.0 V
A9, OE#, and RESET# (Note 2) . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V
WP#/ACC (Note 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . .–0.5 V to V_CC +0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions,
input or I/O pins may overshoot V_SS to –2.0 V for periods of up to 20 ns. Maximum
DC voltage on input or I/O pins is V_CC +0.5 V. During voltage transitions, input or
I/O pins may overshoot to V_CC +2.0 V for periods up to 20 ns. See Figure 8.
2. Minimum DC input voltage on pins A9, OE#, RESET#, and WP#/ACC is –0.5 V.
During voltage transitions, A9, OE#, WP#/ACC, and RESET# may overshoot V_SS
to –2.0 V for periods of up to 20 ns. See Figure 8. Maximum DC input voltage on
pin A9, OE#, and RESET# is +12.5 V which may overshoot to +14.0 V for periods
up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may
overshoot to +12.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the
short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this data sheet is not implied. Exposure of the device to absolute max-
imum rating conditions for extended periods may affect device reliability.
+0.8 V
–0.5 V
–2.0 V
20 ns
20 ns
20 ns
V_CC
+2.0 V
V_CC
+0.5 V
2.0 V
20 ns
20 ns
20 ns
Maximum Negative Overshoot Waveform
Maximum Positive Overshoot Waveform
Figure 8. Maximum Overshoot Waveforms
62
S29PL129J for MCP
S29PL129J_MCP_00_A0 June 4, 2004