M16C6S_09 Datasheet, PDF (9/208 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/6S Group
Overview
Table 1.1.8 Pin Description (2) (Analog pin)
Pin name I/O type
Function
PRE-BOUT Output
This is a pre-amp buffer output.
PRE-INN Input
This is a pre-amp differential signal input.
PRE-INP Input
This is a pre-amp differential signal input.
VREF
Input
This is the reference voltage input of amplifier common to channels 1, 2, and 3.
VDCCN
Input
This is a pin for a test. Usually, please carry out a pull-up.
AMP1-IN Input
This is a channel 1 amplifier input.
AMP1-OUT Output
This is a channel 1 amplifier output.
AMP2-IN Input
This is a channel 2 amplifier input.
AMP2-OUT Output
This is a channel 2 amplifier output.
AMP3-IN Input
This is a channel 3 amplifier input.
AMP3-OUT Output
This is a channel 3 amplifier output.
CHI-INP Input
This is a channel 1 comparator differential input.
CHI-INN Input
This is a channel 1 comparator differential input.
FB1
Output
This is a channel 1 comparator feedback output.
CH2-INP
CH2-INN
Input
Input
This is a channel 2 comparator differential input.
This is a channel 2 comparator differential input.
FB2
Output
This is a channel 2 comparator feedback output.
CH3-INP
CH3-INN
FB3
IOUTC
IOUT
REXT
IFLT
Input
Input
Output
Output
Output
Input
Input
This is a channel 3 comparator differential input.
This is a channel 3 comparator differential input.
This is a channel 3 comparator feedback output.
This is the differential current output of DAC.
This is the differential current output of DAC.
This is for external reference resistor of DAC.
This is the pin for low path filters of PLL.
Rev.5.01 Dec 10, 2009 page 9 of 201
REJ03B0014-0501