M16C6S_09 Datasheet, PDF (156/208 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/6S Group
Electrical Characteristics
Timing Requirements
(VCC = 3V, VSS = 0V, at Topr = – 20 to 85^oC/– 40 to 85^oC/– 40 to 105^oC unless otherwise specified)
Table 1.19.9. Timer A Input (Counter Input in Event Counter Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Min.
Max.
Unit
150
ns
60
ns
60
ns
Table 1.19.10. Timer A Input (Gating Input in Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Min. Max.
Unit
600
ns
300
ns
300
ns
Table 1.19.11. Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN input cycle time
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Unit
Min. Max.
300
ns
150
ns
150
ns
Table 1.19.12. Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
tw(TAH)
tw(TAL)
Parameter
TAiIN input HIGH pulse width
TAiIN input LOW pulse width
Standard
Min. Max.
Unit
150
ns
150
ns
Table 1.19.13. Timer A Input (Counter Increment/decrement Input in Event Counter Mode)
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
Parameter
TAiOUT input cycle time
TAiOUT input HIGH pulse width
TAiOUT input LOW pulse width
TAiOUT input setup time
TAiOUT input hold time
Standard
Min. Max.
Unit
3000
ns
1500
ns
1500
ns
600
ns
600
ns
Table 1.19.14. Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol
tc(TA)
tsu(TAIN-TAOUT)
tsu(TAOUT -TAIN)
TAiIN input cycle time
TAiOUT input setup time
TAiIN input setup time
Parameter
Standard
Min. Max.
Unit
2
µs
500
ns
500
ns
Rev.5.01 Dec 10, 2009 page 156 of 201
REJ03B0014-0501