MC9S12C128V1 Datasheet, PDF (63/690 Pages) Freescale Semiconductor, Inc – MC9S12C Family MC9S12GC Family Reference Manual

Chapter 1 MC9S12C and MC9S12GC Device Overview (MC9S12C128)
Device
MC9S12GC16
MC9S12C32
MC9S12GC32
MC9S12C64
MC9S12GC64
MC9S12C96
MC9S12GC96
MC9S12C128
MC9S12GC128
PAGE
3F
3E
3F
3C
3D
3E
3F
3A
3B
3C
3D
3E
3F
38
39
3A
3B
3C
3D
3E
3F
Table 1-11. Device Specific Flash PAGE Mapping
PAGE Visible with PPAGE Contents
$01,$03,$05,$07,$09......$35,$37,$39,$3B,$3D,$3F
$00,$02,$04,$06,$08,$0A,$0C,$0E,$10,$12......$2C,$2E,$30,$32,$34,$36,$38,$3A,$3C,$3E
$01,$03,$05,$07,$09,$0B,$0D,$0F,$11,$13.....$2D,$2F,$31,$33,$35,$37,$39,$3B,$3D,$3F
$04,$0C,$14,$1C,$24,$2C,$34,$3C
$05,$0D,$15,$1D,$25,$2D,$35,$3D
$06,$0E,$16,$1E,$26,$2E,$36,$3E
$07,$0F,$17,$1F,$27,$2F,$37,$3F
$02,$0A,$12,$1A,$22,$2A,$32,$3A
$03,$0B,$13,$1B,$23,$2B,$33,$3B
$04,$0C,$14,$1C,$24,$2C,$34,$3C
$05,$0D,$15,$1D,$25,$2D,$35,$3D
$06,$0E,$16,$1E,$26,$2E,$36,$3E
$07,$0F,$17,$1F,$27,$2F,$37,$3F
$00,$08,$10,$18,$20,$28,$30,$38
$01,$09,$11,$19,$21,$29,$31,$39
$02,$0A,$12,$1A,$22,$2A,$32,$3A
$03,$0B,$13,$1B,$23,$2B,$33,$3B
$04,$0C,$14,$1C,$24,$2C,$34,$3C
$05,$0D,$15,$1D,$25,$2D,$35,$3D
$06,$0E,$16,$1E,$26,$2E,$36,$3E
$07,$0F,$17,$1F,$27,$2F,$37,$3F
1.7.2 BDM Alternate Clock
The BDM section reference to alternate clock is equivalent to the oscillator clock.
1.7.3 Extended Address Range Emulation Implications
In order to emulate the MC9S12GC or MC9S12C-Family / MC9S12GC-Family devices, external
addressing of a 128K memory map is required. This is provided in a 112 LQFP package version which
includes the 3 necessary extra external address bus signals via PortK[2:0]. This package version is for
emulation only and not provided as a general production package.
The reset state of DDRK is 0x0000, configuring the pins as inputs.
The reset state of PUPKE in the PUCR register is “1” enabling the internal Port K pullups.
In this reset state the pull-ups provide a defined state and prevent a floating input, thereby preventing
unnecessary current flow at the input stage.
To prevent unnecessary current flow in production package options, the states of DDRK and PUPKE
should not be changed by software.
Freescale Semiconductor
MC9S12C-Family / MC9S12GC-Family
63
Rev 01.24