|
MC68HC11PH8 Datasheet, PDF (249/264 Pages) Motorola, Inc – High-density Complementary Metal Oxide Semiconductor (HCMOS) Microcomputer Unit | |||
|
◁ |
GLOSSARY
This section contains abbreviations and specialist words used in this data
sheet and throughout the industry. Further information on many of the terms
may be gleaned from Motorolaâs M68HC11 Reference Manual,
M68HC11RM/AD, or from a variety of standard electronics text books.
$xxxx
%xxxx
A/D, ADC
Bootstrap mode
Byte
CCR
CERQUAD
Clear
CMOS
COP
CPU
D/A, DAC
EEPROM
EPROM
ESD
Expanded mode
EVS
The digits following the â$â are in hexadecimal format.
The digits following the â%â are in binary format.
Analog-to-digital (converter).
In this mode the device automatically loads its internal memory from an external
source on reset and then allows this program to be executed.
Eight bits.
Condition codes register; an integral part of the CPU.
A ceramic package type, principally used for EPROM and high temperature devices.
â0â â the logic zero state; the opposite of âsetâ.
Complementary metal oxide semiconductor. A semiconductor technology chosen for
its low power consumption and good noise immunity.
Computer operating properly. aka âwatchdogâ. This circuit is used to detect device
runaway and provide a means for restoring correct operation.
Central processing unit.
Digital-to-analog (converter).
Electrically erasable programmable read only memory. aka âEEROMâ.
Erasable programmable read only memory. This type of memory requires exposure
to ultra-violet wavelengths in order to erase previous data. aka âPROMâ.
Electrostatic discharge.
In this mode the internal address and data bus lines are connected to external pins.
This enables the device to be used in much more complex systems, where there is a
need for external memory for example.
Evaluation system. One of the range of platforms provided by Motorola for evaluation
and emulation of their devices.
MC68HC11PH8
GLOSSARY
TPG
MOTOROLA
i
|
▷ |