W83877ATF Datasheet, PDF (90/191 Pages) Winbond – enhanced version from Winbonds most popular I/O chip W83877F

W83877ATF
4 .2.4 EPP Address Port
The address port is available only in EPP mode. Bit definitions are as follows:
7 6 5 43 2 1 0
PD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
The contents of DB0-DB7 are buffered (non-inverting) and output to ports PD0-PD7 during a write
operation. The leading edge of IOW causes an EPP address write cycle to be performed, and the
trailing edge of IOW latches the data for the duration of the EPP write cycle.
PD0-PD7 ports are read during a read operation. The leading edge of IOR causes an EPP address
read cycle to be performed and the data to be output to the host CPU.
4.2.5 EPP Data Port 0-3
These four registers are available only in EPP mode. Bit definitions of each data port are as follows:
76 5 4 3 2 1 0
PD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
When accesses are made to any EPP data port, the contents of DB0-DB7 are buffered (non-
inverting) and output to the ports PD0-PD7 during a write operation. The leading edge of IOW causes
an EPP data write cycle to be performed, and the trailing edge of IOW latches the data for the
duration of the EPP write cycle.
During a read operation, ports PD0-PD7 are read, and the leading edge of IOR causes an EPP read
cycle to be performed and the data to be output to the host CPU.
- 86 -
Publication Release Date: April 1998
Version 0.51