SH7712 Datasheet, PDF (736/978 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value
11 to 8 POST213 to All 0
POST210
7 to 4 POST223 to All 0
POST220
3 to 0 POST233 to All 0
POST230
R/W Description
R/W These bits set the conditions for referring to the CAM
entry table 21. By setting multiple bits to 1, multiple
conditions can be selected.
POST213: The CAM entry table 21 is referred in port
0 reception.
POST212: The CAM entry table 21 is referred in port
0 to 1 relay.
POST211: The CAM entry table 21 is referred in port
1 reception.
POST210: The CAM entry table 21 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 22. By setting multiple bits to 1, multiple
conditions can be selected.
POST223: The CAM entry table 22 is referred in port
0 reception.
POST222: The CAM entry table 22 is referred in port
0 to 1 relay.
POST221: The CAM entry table 22 is referred in port
1 reception.
POST220: The CAM entry table 22 is referred in port
1 to 0 relay.
R/W These bits set the conditions for referring to the CAM
entry table 23. By setting multiple bits to 1, multiple
conditions can be selected.
POST233: The CAM entry table 23 is referred in port
0 reception.
POST232: The CAM entry table 23 is referred in port
0 to 1 relay.
POST231: The CAM entry table 23 is referred in port
1 reception.
POST230: The CAM entry table 23 is referred in port
1 to 0 relay.
Rev. 1.00 Dec. 27, 2005 Page 694 of 932
REJ09B0269-0100