SH7712 Datasheet, PDF (710/978 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7700 Series

Section 18 Ethernet Controller (EtherC)
Initial
Bit
Bit Name Value R/W
8
FW11
0
R/W
7 to 0 
All 0
R
Description
Sets the processing method when frames from port 1
are addressed to other than this LSI.
0: CAM hit: Frames are relayed to port 0
CAM mishit: Frames are not relayed
1: CAM hit: Frames are not relayed
CAM mishit: Frames are relayed to port 0
Reserved
These bits are always read as 0. The write value
should always be 0.
Rev. 1.00 Dec. 27, 2005 Page 668 of 932
REJ09B0269-0100