GXLV Datasheet, PDF (105/247 Pages) National Semiconductor (TI) – Geode™ GXLV Processor Series Low Power Integrated x86 Solutions

Integrated Functions (Continued)
Table 4-9. Internal Bus Interface Unit Registers
Bit
Name
Description
14
SMIC
SMIC: All I/O accesses for address range 3C0h to 3CFh generate an SMI: 0 = Disable; 1 = Enable.
(Used for VGA virtualization.)
13
SMIB
SMIB: All I/O accesses for address range 3B0h to 3BFh generate an SMI: 0 = Disable; 1 = Enable
(Used for VGA virtualization.)
12:8
RSVD
Reserved: Set to 0.
7
XPD
X-Bus Pipeline: The address for the next cycle can be driven on the X-Bus before the completion of the
data phase of the current cycle.
0 = Enable
1 = Disable
6
GNWS
X-Bus Graphics Pipe No Wait State: Data driven on the X-Bus from the graphics pipeline:
0 = 1 full clock before X_DSX is asserted
1 = On the same clock in which X_RDY is asserted
5
XNWS
X-Bus No Wait State: Data driven on the X-Bus from the internal bus interface unit:
0 = 1 full clock before X_DSX is asserted
1 = On the same clock in which X_RDY is asserted
4
GEA
Graphics Enable for A Region: Allow memory R/W operations for address range B8000h to BFFFFh
be directed to the graphics pipeline: 0 = Disable; 1 = Enable. If enabled, the GEA region is always non-
cacheable. In the region control field (A0) the cache enable bit (bit2) is ignored.
(Used for VGA emulation.)
3:0
A0
A0 Region: Region control field for address range A0000h to AFFFFh.
Note: Refer to Table 4-10 on page 106 for decode.
GX_BASE+8008h-800Bh
BC_XMAP_2 Register (R/W)
Default Value = 00000000h
31:28
DC
DC Region: Region control field for address range DC000h to DFFFFh.
27:24
D8
D8 Region: Region control field for address range D8000h to DBFFFh.
23:20
D4
D4 Region: Region control field for address range D4000h to D7FFFh.
19:16
D0
D0 Region: Region control field for address range D0000h to D3FFFh.
15:12
CC
CC Region: Region control field for address range CC000h to CFFFFh.
11:8
C8
C8 Region: Region control field for address range C8000h to CBFFF.
7:4
C4
C4 Region: Region control field for address range C4000h to C7FFFh.
3:0
C0
C0 Region: Region control field for address range C0000h to C3FFFh.
Note: Refer to Table 4-10 on page 106 for decode.
GX_BASE+800Ch-800Fh
BC_XMAP_3 Register (R/W)
Default Value = 00000000h
31:28
FC
FC Region: Region control field for address range FC000h to FFFFFh.
27:24
F8
F8 Region: Region control field for address range F8000h to FBFFFh.
23:20
F4
F4 Region: Region control field for address range F4000h to F7FFFh.
19:16
F0
F0 Region: Region control field for address range F0000h to F3FFFh.
15:12
EC
EC Region: Region control field for address range EC000h to EFFFFh.
11:8
E8
E8 Region: Region control field for address range E8000h to EBFFFh.
7:4
E4
E4 Region: Region control field for address range E4000h to E7FFFh.
3:0
E0
E0 Region: Region control field for address range E0000h to E3FFFh.
Note: Refer to Table 4-10 on page 106 for decode.
Revision 1.1
105
www.national.com