MC68HC908LJ24 Datasheet, PDF (187/464 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
Monitor ROM (MON)
ROM-Resident Routines
10.6.6 MON_LDRNGE
In monitor mode, LDRNGE is used to load the data array in RAM with
data from a range of FLASH locations.
Table 10-16. ICP_LDRNGE Routine
Routine Name
MON_LDRNGE
Routine Description Loads data from a range of locations, in monitor mode
Calling Address
$FF24
Stack Used
11 bytes
Data Block Format
Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
Data 1
:
Data N
The MON_LDRNGE routine is designed to be used in monitor mode. It
performs the same function as the LDRNGE routine (see 10.6.3
LDRNGE), except that MON_LDRNGE returns to the main program via
an SWI instruction. After a MON_LDRNGE call, the SWI instruction will
return the control back to the monitor code.
MC68HC908LJ24/LK24 — Rev. 2
MOTOROLA
Monitor ROM (MON)
For More Information On This Product,
Go to: www.freescale.com
Data Sheet
187