MC68HC908LJ24 Datasheet, PDF (159/464 Pages) Motorola, Inc – Microcontrollers

Freescale Semiconductor, Inc.
System Integration Module (SIM)
SIM Registers
A break interrupt during stop mode sets the SIM break stop/wait bit
(SBSW) in the SIM break status register (SBSR).
The SIM counter is held in reset from the execution of the STOP
instruction until the beginning of stop recovery. It is then used to time the
recovery period. Figure 9-18 shows stop mode entry timing.
NOTE: To minimize stop current, all pins configured as inputs should be driven
to a logic 1 or logic 0.
CPUSTOP
IAB STOP ADDR
STOP ADDR + 1
SAME
SAME
IDB
PREVIOUS DATA NEXT OPCODE
SAME
SAME
R/W
NOTE: Previous data can be operand data or the STOP opcode, depending on the last
instruction.
Figure 9-18. Stop Mode Entry Timing
ICLK
NT/BREAK
IAB
STOP RECOVERY PERIOD
STOP +1
STOP + 2 STOP + 2
SP
SP – 1
SP – 2
SP – 3
Figure 9-19. Stop Mode Recovery from Interrupt or Break
9.8 SIM Registers
The SIM has three memory-mapped registers:
• SIM Break Status Register (SBSR) — $FE00
• SIM Reset Status Register (SRSR) — $FE01
• SIM Break Flag Control Register (SBFCR) — $FE03
MC68HC908LJ24/LK24 — Rev. 2
MOTOROLA
System Integration Module (SIM)
For More Information On This Product,
Go to: www.freescale.com
Data Sheet
159