MC68HC05JJ6 Datasheet, PDF (80/216 Pages) Freescale Semiconductor, Inc – General Release Specification Microcontrollers

Parallel Input/Output
7.3.2 Data Direction Register A
The contents of the port A data direction register (DDRA) determine
whether each port A pin is an input or an output. Writing a logic one to a
DDRA bit enables the output buffer for the associated port A pin. A
DDRA bit set to a logic one also disables the pulldown device for that pin.
Writing a logic zero to a DDRA bit disables the output buffer for the
associated port A pin. The upper two bits always read as logical zeros.
A reset initializes all DDRA bits to logic zeros, configuring all port A pins
as inputs and disabling the voltage comparators from driving PA4 or
PA5.
$0004
Read:
Write:
Reset:
Bit 7
6
5
4
3
2
1
Bit 0
0
0
DDRA5 DDRA4 DDRA3 DDRA2 DDRA1 DDRA0
0
0
0
0
0
0
0
0
= Unimplemented
Figure 7-2. Data Direction Register A (DDRA)
DDRA5–DDRA0 — Port A Data Direction Bits
These read/write bits control port A data direction. Reset clears the
DDRA5–DDRA0 bits.
1 = Corresponding port A pin configured as output and pulldown
device disabled
0 = Corresponding port A pin configured as input
General Release Specification
80
MC68HC05JJ6/MC68HC05JP6 — Rev. 3.2
Parallel Input/Output
Freescale Semiconductor