MC68HC05JJ6 Datasheet, PDF (190/216 Pages) Freescale Semiconductor, Inc – General Release Specification Microcontrollers

Electrical Specifications
13.2 Introduction
This section contains the electrical and timing specifications.
13.3 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from
high static voltages; however, do not apply voltages higher than those
shown in the table here. Keep V_IN and V_OUT within the range
V_SS ≤ (V_IN or V_OUT) ≤ V_DD. Connect unused inputs to the appropriate
voltage level, either V_SS or V_DD.
Rating
Supply Voltage
Self-Check Mode
(IRQ Pin Only)
Current Drain Per Pin
Excluding V_DD and V_SS
Operating Junction Temperature
Storage Temperature Range
Symbol
Value
Unit
V_DD
–0.3 to +7.0
V
V_IN
V_SS –0.3 to + 12 V
I
25
mA
T_J
+150
°C
T_stg
–65 to +150
°C
NOTE:
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 13.8 DC Electrical Characteristics (5.0 Vdc) and
13.9 DC Electrical Characteristics (3.0 Vdc) for guaranteed operating
conditions.
General Release Specification
190
MC68HC05JJ6/MC68HC05JP6 — Rev. 3.2
Electrical Specifications
Freescale Semiconductor