MC68HC05JJ6 Datasheet, PDF (159/216 Pages) Freescale Semiconductor, Inc – General Release Specification Microcontrollers

Programmable Timer
$0018 Bit 7
6
5
Read: Bit 15
14
13
Write:
Reset: 1
1
1
4
3
2
12
11
10
1
1
1
1
Bit 0
9
Bit 8
1
1
$0019 Bit 7
6
5
4
3
2
1
Bit 0
Read: Bit 7
6
5
4
3
2
1
Bit 0
Write:
Reset: 1
1
1
1
1
1
0
0
= Unimplemented
Figure 11-3. Programmable Timer Registers (TMRH and TMRL)
The TMRL latch is a transparent read of the LSB until a read of the
TMRH takes place. A read of the TMRH latches the LSB into the TMRL
location until the TMRL is again read. The latched value remains fixed
even if multiple reads of the TMRH take place before the next read of the
TMRL. Therefore, when reading the MSB of the timer at TMRH, the LSB
of the timer at TMRL must also be read to complete the read sequence.
During power-on reset (POR), the counter is initialized to $FFFC and
begins counting after the oscillator startup delay. Because the counter is
16 bits and preceded by a fixed prescaler, the value in the counter
repeats every 262,144 internal bus clock cycles (524,288 oscillator
cycles).
When the free-running counter rolls over from $FFFF to $0000, the timer
overflow flag bit (TOF) is set in the TSR. When the TOF is set, it can
generate an interrupt if the timer overflow interrupt enable bit (TOIE) is
also set in the TCR. The TOF flag bit can only be reset by reading the
TMRL after reading the TSR.
Other than clearing any possible TOF flags, reading the TMRH and
TMRL in any order or any number of times does not have any effect on
the 16-bit free-running counter.
MC68HC05JJ6/MC68HC05JP6 — Rev. 3.2
Freescale Semiconductor
Programmable Timer
General Release Specification
159