MC9S08AW16CFUE Datasheet, PDF (286/324 Pages) Freescale Semiconductor, Inc – MC9S08AW60 Features

Appendix A Electrical Characteristics and Timing Specifications
Solving equations 1 and 2 for K gives:
K = P_D × (T_A + 273°C) + θ_JA × (P_D)²
Eqn. A-3
where K is a constant pertaining to the particular part. K can be determined from equation 3 by measuring
P_D (at equilibrium) for a known T_A. Using this value of K, the values of P_D and T_J can be obtained by
solving equations 1 and 2 iteratively for any value of T_A.
A.5 ESD Protection and Latch-Up Immunity
Although damage from electrostatic discharge (ESD) is much less common on these devices than on early
CMOS circuits, normal handling precautions should be used to avoid exposure to static discharge.
Qualification tests are performed to ensure that these devices can withstand exposure to reasonable levels
of static without suffering any permanent damage.
All ESD testing is in conformity with AEC-Q100 Stress Test Qualification for Automotive Grade
Integrated Circuits. During the device qualification ESD stresses were performed for the Human Body
Model (HBM), the Machine Model (MM) and the Charge Device Model (CDM).
A device is defined as a failure if after exposure to ESD pulses the device no longer meets the device
specification. Complete DC parametric and functional testing is performed per the applicable device
specification at room temperature followed by hot temperature, unless specified otherwise in the device
specification.
Table A-4. ESD and Latch-up Test Conditions
Model
Description
Human Body
Model
Series Resistance
Storage Capacitance
Number of Pulse per pin
Series Resistance
Machine Model _{Storage Capacitance}
Number of Pulse per pin
Latch-Up
Minimum input voltage limit
Maximum input voltage limit
Symbol
R1
C
—
R1
C
—
Value
1500
100
3
0
200
3
–2.5
7.5
Unit
Ω
pF
Ω
pF
V
V
Table A-5. ESD and Latch-Up Protection Characteristics
Num C
Rating
1 C Human Body Model (HBM)
2 C Machine Model (MM)
3 C Charge Device Model (CDM)
4 C Latch-up Current at T_A = 125°C
Symbol
V_HBM
V_MM
V_CDM
I_LAT
Min
± 2000
± 200
± 500
± 100
Max
—
—
—
—
Unit
V
V
V
mA
MC9S08AW60 Data Sheet, Rev 2
286
Freescale Semiconductor