MC9S08AW16CFUE Datasheet, PDF (163/324 Pages) Freescale Semiconductor, Inc – MC9S08AW60 Features

Chapter 9 Keyboard Interrupt (S08KBIV1)
9.5.3 KBI Interrupt Controls
The KBF status flag becomes set (1) when an edge event has been detected on any KBI input pin. If
KBIE = 1 in the KBI1SC register, a hardware interrupt will be requested whenever KBF = 1. The KBF flag
is cleared by writing a 1 to the keyboard acknowledge (KBACK) bit.
When KBIMOD = 0 (selecting edge-only operation), KBF is always cleared by writing 1 to KBACK.
When KBIMOD = 1 (selecting edge-and-level operation), KBF cannot be cleared as long as any keyboard
input is at its asserted level.
MC9S08AW60 Data Sheet, Rev 2
Freescale Semiconductor
163