MC68HC908GT16_07 Datasheet, PDF (176/292 Pages) Freescale Semiconductor, Inc – Microcontrollers

Enhanced Serial Communications Interface (ESCI) Module
14.9 ESCI Arbiter
The ESCI module comprises an arbiter module designed to support software for communication tasks as
bus arbitration, baud rate recovery and break time detection. The arbiter module consists of an 9-bit
counter with 1-bit overflow and control logic. The CPU can control operation mode via the ESCI arbiter
control register (SCIACTL).
14.9.1 ESCI Arbiter Control Register
Address:
Read:
Write:
Reset:
$000A
Bit 7
6
5
ALOST
AM1
AM0
4
ACLK
3
2
1
AFIN
ARUN AROVFL
0
0
0
0
0
0
0
= Unimplemented
Figure 14-19. ESCI Arbiter Control Register (SCIACTL)
Bit 0
ARD8
0
AM1 and AM0 — Arbiter Mode Select Bits
These read/write bits select the mode of the arbiter module as shown in Table 14-12. Reset clears
AM1 and AM0.
Table 14-12. ESCI Arbiter Selectable Modes
AM[1:0]
00
01
10
11
ESCI Arbiter Mode
Idle / counter reset
Bit time measurement
Bus arbitration
Reserved / do not use
ALOST — Arbitration Lost Flag
This read-only bit indicates loss of arbitration. Clear ALOST by writing a 0 to AM1. Reset clears
ALOST.
ACLK — Arbiter Counter Clock Select Bit
This read/write bit selects the arbiter counter clock source. Reset clears ACLK.
1 = Arbiter counter is clocked with one half of the ESCI input clock generated by the ESCI prescaler
0 = Arbiter counter is clocked with one quarter of the bus clock
AFIN— Arbiter Bit Time Measurement Finish Flag
This read-only bit indicates bit time measurement has finished. Clear AFIN by writing any value to
SCIACTL. Reset clears AFIN.
1 = Bit time measurement has finished
0 = Bit time measurement not yet finished
ARUN— Arbiter Counter Running Flag
This read-only bit indicates the arbiter counter is running. Reset clears ARUN.
1 = Arbiter counter running
0 = Arbiter counter stopped
MC68HC908GT16 • MC68HC908GT8 • MC68HC08GT16 Data Sheet, Rev. 5.0
176
Freescale Semiconductor