C515C_9711 Datasheet, PDF (3/268 Pages) Siemens Semiconductor Group – 8-Bit CMOS Microcontroller

General Information
C515C
C515C User’s Manual
Revision History :
11.97
Previous Releases :
06.96 (Original Version)
Page (new Page (prev. Subjects (changes since last revision)
version) version)
general
C515C-8E OTP version included (new chapter 10)
C515C AC/DC characteristics are now in chapter 11
1-1
1-1
Description of the new features of the C515C-8E; figure 1-1 modified
1-9
1-9
PSEN and ALE are activated every three (and not six) osc. periods
Table 1-1 Table 1-1 Ports 1 to 5 and 7 descriptions are corrected to quasi-bidirectional
2-2
2-2
Figure 2-1 modified for C515C-8E
3-2
3-2
Section 3.1 : C515C-8E version included
3-3, 3-11, 3-3, 3-11, Description of SYSCON : bit CSWO and C515C-8E reset value added
4-4, 6-4, 4-4, 6-4,
Tab.3-2/3-3 Tab.3-2/3-3
Tab.3-2 / Tab.3-2 / Description of PCON1 : bit WS and C515C-8E reset value added
3-3, pg.9-2 3-3, pg.9-2
3-17
3-17
Reset value of P4 and table entry for bit P7.0 (INT7) corrected;
Version registers for C515C-8E added
4-2, 4-5 4-2, 4-5 Figure 4-1 and 4-2 corrected
4-3
4-3
3rd paragraph of chapter 4.1.3 removed
4-10 - 4-12 4-10 - 4-12 Chapter 4.7 “ROM Protection...“ enhanced for OTP verification
4-11
4-11
Figure 4-5 corrected
4-12
4-12
Figure 4-5 : OTP version reference added
6-6
6-6
Figure 6-4 and text : delay part corrected
6-10, 6-11 6-10, 6-11 Figures 6-7 and 6-8 : delay part corrected
6-18
6-18
Figure 6-14 corrected
6-39, 6-43 6-39, 6-43 Figure 6-22 and 6-26 : figure content exchanged
6-67
6-67
6.4.3.: first paragraph, divider range corrected
6-72
6-72
Baudrate selection bits corrected
6-105,
6-105,
multiple formulas corrected
6-106
6-106
6-108
6-108
last paragraph added
6-109
-
Chapter 6.5.8 (CAN switch-off capability) added
7-2
7-2
Figure 7-1 : bit address for bit RXIE added
9-6, 9-7 9-6, 9-7 Adding P4.7/RXDC wake-up capability to the description
9-7
9-7
Figure 9-1 corrected
9-8
9-8
Additional text in last paragraph before 9.5
9-15
9-15
Note below figure 9-5 added
Chapter 10 -
New chapter : describes OTP programming of the C515C-8E
11-1
10-1
Minimum value for ambient temperature under bias corrected to –40˚C
11-4 - 11-6 10-3
Improved and extended Icc specification
11-10
11-11
10-8
10-10
SSC timing parameter t_SCLK (master mode) and t_HI improved
Wrong figure “External Clock Cycle“ exchanged with correct figure
11-14 to -
Programming interface characteristics added
11-17
Semiconductor Group