MC68HC16Z1CPV16 Datasheet, PDF (285/500 Pages) Freescale Semiconductor, Inc – Symbols and Operators, CPU16 Register Mnemonics

Freescale Semiconductor, Inc.
APPENDIX A
ELECTRICAL CHARACTERISTICS
Table A-1 Maximum Ratings
Num
Rating
1 Supply Voltage^{1, 2, 3}
2 Input Voltage ^{1, 2, 3, 4, 5, 7}
Symbol
V_DD
V_IN
Value
– 0.3 to +6.5
– 0.3 to +6.5
Unit
V
V
3
Instantaneous Maximum Current
Single Pin Limit (applies to all pins)^{1, 3, 5, 6}
I_D
25
mA
Operating Maximum Current
4
Digital Input Disruptive Current^{3, 5, 6, 7, 8}
V_NEGCLAMP ≈ –0.3 V
V_POSCLAMP ≈ V_DD + 0.3 V
Operating Temperature Range
5
“C” Suffix
“V” Suffix
“M” Suffix
Ii_D
– 500 to +500
µA
T_L to T_H
T_A
– 40 to +85
– 40 to +105
°C
– 40 to +125
6 Storage Temperature Range
T_stg
– 55 to +150
°C
NOTES:
1. Permanent damage can occur if maximum ratings are exceeded. Exposure to voltages or
currents in excess of recommended values affects device reliability. Device modules may not
operate normally while being exposed to electrical extremes.
2. Although sections of the device contain circuitry to protect against damage from high static
voltages or electrical fields, take normal precautions to avoid exposure to voltages higher than
maximum-rated voltages.
3. This parameter is periodically sampled rather than 100% tested.
4. All pins except TSC.
5. Input must be current limited to the value specified. To determine the value of the required
current-limiting resistor, calculate resistance values for positive and negative clamp voltages,
then use the larger of the two values.
6. Power supply must maintain regulation within operating V_DD range during instantaneous and
operating maximum current.
7. All functional non-supply pins are internally clamped to V_SS. All functional pins except EXTAL,
TSC, and XFC are internally clamped to V_DD.
8. Total input current for all digital input-only and all digital input/output pins must not exceed 10
mA. Exceeding this limit can cause disruption of normal operation.
M68HC16 Z SERIES
ELECTRICAL CHARACTERISTICS
USER’S MANUAL
For More Information On This Product,
A-1
Go to: www.freescale.com