SAM7X256_14 Datasheet, PDF (648/662 Pages) ATMEL Corporation – ARM-based Flash MCU

Version
6120H
(Continued) ^Comments
UDP:
Section 34.6 ”USB Device Port (UDP) User Interface”, reset value for UDP_RST_EP is 0x000_0000.
Table 34-1, “USB Endpoint Description”, footnote added to Dual-Bank heading.
Section 34.5.2.5 ”Transmit Data Cancellation”, added to datasheet
Section 34.6.9 ”UDP Reset Endpoint Register”, added steps to clear endpoints.
Electrical Characteristics:
Table 38-2, “DC Characteristics”, CMOS conditions added to IO for VOL and VOH.
Table 38-16, “External Voltage Reference Input”, added ADVREF input w/conditions “8-bit resolution mode”.
Mechanical Characteristics:
Table 39-1, “100-lead LQFP Package Dimensions”, Symbol line A, Inch Max value is 0.063
Ordering Information:
Section 40. ”AT91SAM7X Ordering Information”, MLR B parts added to ordering information.
Errata:
Section 41.5 ”AT91SAM7X256/128 Errata - Rev. B Parts”, added to errata.
Section 41.4.3.1 ”EFC: Embedded Flash Access Time”, added to SAM7X512 erraa.
Section 41.4.8.7 ”SPI: Software Reset must be Written Twice” added to errata.
USART: XOFF Character Bad Behavior, removed from errata.
Change
Request
Ref.
5049
5150
rfo
5608
6064
6064
5989
5786
5338
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
648