English
Language : 

SAM7X256_14 Datasheet, PDF (119/662 Pages) ATMEL Corporation – ARM-based Flash MCU
In the same way, the Clear Lock command (CLB) is used to clear lock bits. All the lock bits are also cleared by the EA
command.
Table 20-10. Set and Clear Lock Bit Command
Step Handshake Sequence
MODE[3:0]
DATA[15:0]
1
Write handshaking
CMDE
SLB or CLB
2
Write handshaking
DATA
Bit Mask
Lock bits can be read using Get Lock Bit command (GLB). The nth lock bit is active when the bit n of the bit mask is set..
Table 20-11. Get Lock Bit Command
Step Handshake Sequence
1
Write handshaking
2
Read handshaking
MODE[3:0]
CMDE
DATA
DATA[15:0]
GLB
Lock Bit Mask Status
0 = Lock bit is cleared
1 = Lock bit is set
20.2.5.5 Flash General-purpose NVM Commands
General-purpose NVM bits (GP NVM bits) can be set using the Set GPNVM command (SGPB). This command also
activates GP NVM bits. A bit mask is provided as argument to the command. When bit 0 of the bit mask is set, then the
first GP NVM bit is activated.
In the same way, the Clear GPNVM command (CGPB) is used to clear general-purpose NVM bits. All the general-
purpose NVM bits are also cleared by the EA command. The general-purpose NVM bit is deactivated when the
corresponding bit in the pattern value is set to 1.
Table 20-12. Set/Clear GP NVM Command
Step Handshake Sequence
MODE[3:0]
DATA[15:0]
1
Write handshaking
CMDE
SGPB or CGPB
2
Write handshaking
DATA
GP NVM bit pattern value
General-purpose NVM bits can be read using the Get GPNVM Bit command (GGPB). The nth GP NVM bit is active when
bit n of the bit mask is set..
Table 20-13. Get GP NVM Bit Command
Step Handshake Sequence
1
Write handshaking
MODE[3:0]
CMDE
2
Read handshaking
DATA
DATA[15:0]
GGPB
GP NVM Bit Mask Status
0 = GP NVM bit is cleared
1 = GP NVM bit is set
20.2.5.6 Flash Security Bit Command
A security bit can be set using the Set Security Bit command (SSE). Once the security bit is active, the Fast Flash
programming is disabled. No other command can be run. An event on the Erase pin can erase the security bit once the
contents of the Flash have been erased.
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
119