M16C1N Datasheet, PDF (199/238 Pages) Renesas Technology Corp – RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/10 SERIES

M16C/1N Group
19. Flash Memory Version
(7) Wait mode
When shifting to wait mode, set the FMR01 bit to "0" (CPU rewrite mode disabled) before executing
the WAIT instruction.
(8) Stop mode
When shifting to stop mode, the following settings are required:
• Set the FMR01 bit to "0" (CPU rewrite mode disabled) and setting the CM10 bit to "1" (stop mode).
• Execute the JMP.B instruction subsequent to the instruction which sets the CM10 bit to "1" (stop
mode)
Example program BSET
0, CM1 ; Stop mode
JMP.B
L1
L1:
Program after returning from stop mode
(9) Low power dissipation mode, on-chip oscillator low power dissipation mode
If the CM05 bit is set to "1" (main clock stop), the following commands must not be executed.
• Program
• Block erase
Rev.1.00 Oct 20, 2004 page 187 of 222
REJ09B0007-0100Z